Fein KBM 32 Q - 6. Tools and Special Tools

Sahre/MVK 03/07
All rights reserved by FEIN, in particular as these apply to trademarks. FEIN
retains all powers of disposition such as copying and right of transfer.
FRT: KBM 32 Q
6. Tools and special tools
• Mandrel press up to 3t Retail
• Vice Retail
• Soft clamping jaws Retail
• Plastic hammer Retail
• Screwdriver PH 2, Torx 20 Retail
• Slotted screwdriver Retail
• Circlip pliers (inside / straight) Retail
• Circlip pliers (outside / straight) Retail
• Flat pliers Retail
• Nut SW 13 + Extension + ratchet Retail
•Hexagon socket wrench 2.5, 3, 4 mm Retail
• Sleeve Ø A 60 / L 60 / 5 thick
• Bolts Ø 17.5 / 60
 Pull-off cap 6 41 04 150 008
 Clamping chuck 6 41 07 019 001
 Clamping chuck 6 41 07 026 000
 Cable hook 0 72 00 310 066
 Ball bearing support D = 19 mm
 Ball bearing support D = 26 mm