14
en
Filling the removed coolant tank. (Fig. 5).
➤ Pull the empty coolant tank out of drill
stand housing of the magnetic core drill.
➤ Unscrew the bottom closing cap from
the coolant tank.
➤ Fill in pump-feedable cooling lubricant.
Do not use oil!
➤ Firmly screw the bottom closing cap
back on to the coolant tank.
➤ Insert the filled coolant tank into the
holder on the drill stand housing inten-
ded for this purpose.
Fig. 5
Coolant container
Bottom closing cap
3 41 01 126 21 0.book Seite 14 Donnerstag, 21. Januar 2010 1:48 13
To Next Page
Loading...
