Security light comes
on during the day.
1. Dusk-to-Dawn sensor is in a shaded area and is fooled
into thinking it is nighttime.
2. Dusk-to-Dawn sensor is faulty.
1. Shine a flashlight onto the light sensor. If the
security light turns off then the fixture is
mounted in an area that does not allow enough
light to enter the sensor. Relocate security light.
2. If under warranty, contact Customer Service.
Security light cycles
ON and OFF
continuously
1. Dusk-to-Dawn sensor is sensing reflected light from the
security light.
1. Change the position of the light head, aim
light away from the reflecting surfaces.
2. Put a small piece of black electrical tape
over the Dusk-to-Dawn sensor.
3. Relocate the security light to a different
location where it no longer causes reflected
light.
To Next Page
Loading...