FeiYu Tech A2000 - User Guide; Insert the Batteries; Attach Camera

3
2
(1)Remove the quick plate from the gimbal.
Insert the provided 1/4-20 screw into a mounting
hole on quick plate.For a front-heavy camera(i.e.
bigger,heaver lens),select a mounting hole closer
to the back end of the quick plate to ensure proper
balance.
1
2. User Guide
Attention: please read the following instructions before turning on the power on the gimbal
Insert the Batteries
Remove the handle, insert 2 pcs 18650 batteries
and tighten the handle.
Prior to use, please be sure to fully charge
the batteries.
Attach Camera
18650
18650
*The screw is screwed into the threaded
holes on the quick plate.
Thumb screw