FeiYu Tech AK2000C - Page 11

www.feiyu-tech.com 98
2.4.3 Balance pan axis
· Hold the handle and slant it (＞15°), put the
vertical arm horizontally.
· Let it go, observe the dropping direction of the
camera.
· Loosen the lock screw(red).
· Move the camera.
Status A:
Tip: Slide the vertical arm slightly in
the direction of the arrow.
Status A:
Tip: Slide the vertical arm slightly in
the direction of the arrow.
·Move the camera until it can stay stably at any
angles, then tighten the screw.