FeiYu Tech QING - 2 Start to Use; Charging

www.feiyu-tech.com 4
2. Start to Use
TIPS
· Please install the camera and balance it before power on the gimbal.
· Please do not touch tilt motor and gears to avoid gripping.
· When the battery is low, please charge the battery.
· When not in use, power o󽗈 the gimbal and then remove the batteries.
2.1 Charging
Please fully charge the dedicated battery before power on the gimbal
for the 󽗉rst time.
Please choose the suitable charger when quickly charging.
2.1.1 Charging for the Gimbal
Using USB 2.0 to Type-C cable to charge the dedicated battery, support 5V/3A
input.
Battery Indicator: All the 3 indicators turn on when battery is full
Function Indicator:
quickly 󽗊ashing: Low battery and please charge in time
slowly 󽗊ashing: Pan mode
constant on: Lock mode