www.feiyu-tech.com 76
Step 2: Mount camera on ARCA quick release plate ②, and tighten it.
Step 3: Install the ARCA quick release plate on the quick release plate, and tighten
the ARCA quick release plate safety lock ③. Install the lens holder ④ and tighten
the thumb screw ⑤ to hold the lens rmly.
Step 4: Unlock the position lock ①, and loose the thumb screw ⑥. Slide the
slide arm ⑦ to balance, and tighten the thumb screw ⑥ after the balancing is
completed.
If the camera can stay stable after moving your hand away, which means
balanced.
To Next Page
Loading...
