FEIYUTECH VLOG Pocket - Start to Use Gimbal; Tips for Gimbal Operation; Fold and Unfold; Unlock and Lock Axis Clamp

!
02
www.feiyu-tech.com
(1) Please fully charge the battery before powering on the gimbal for the first time.
(2) If the power is too low, the red light will flash three times every five seconds that
indicating you should charge it immediately.
(3) When not in use, power off the gimbal.
(4) Unlock the three axis clamp before powering on the gimbal.
(5) Landscape to mount smartphone.
TIPS
2. Start to Use
Folded status Unfolded status
2.1. Fold and Unfold
(1) Loosen the folding knob and tighten the knob after unfolding
the vertical arm.
(2) Unlock the three axis clamp.
(1) Lock the three axis clamp.
(2) Loosen the folding knob, and then tighten the knob after folding
the vertical arm.
Unfold
Fold
Unlock status
Take the pan axis clamp for example.
Lock status
Unlock / Lock the clamp