Remove paper (Paper jam) Disengages power to the motor until paper jam is removed.
ECC
The ECC (Electronic Capacity Control) measures the amount of paper going through the machine
per pass. This in done by a Hall Effect transistor located on the motor. As paper is shredded the
ECC measures the motor’s RPM. The lower the RPM the higher the ECC gauge will light up. (The
more paper that is inserted the lower motor RPM)
Lubrication
The 3140S/4850S requires no lubrication, unless cutters squeak.
The 3140C/4850C requires lubrication after every waste bag replacement.
Please use Fellowes Oil part # 3525001
WARNING: Do not use aerosol lubricants of any kind, as this could void the warranty.
ECC Hall Effect transistor
To Next Page
Loading...
Need help?
General
