Femi NG200 - User Manual

Art.
NG200
NG201
ISTRUZIONI PER L’USO E MANUTENZIONE
INSTRUCTIONS FOR USE AND MAINTENANCE
GEBRAUCHSANLEITUNGEN UND WARTUNG
MODE D’EMPLOI ET ENTRETIEN
INSTRUCCIONES PARA EL USO Y MANUTENCION
INSTRUÇÕES DE UTILIZAÇÃO
GEBRUIK- EN ONDERHOUDSAANWIJZINGEN
SEGATRICE A NASTRO
BAND-SAW MACHINE
BANDSÄGEMASCHINE
SCIE A RUBAN
SIERRA DE CINTA
SERRA DE FITA
BANDZAAGMACHINE
CERTIFICATA
CERTIFIED
GEPRÜFT
CERTIFIE
CERTIFICADA
CERTIFICADA
GECERTIFICEERD
www.femi.it

Summary

Introduction to Use

Conventional Symbols and Safety Rules

Explains warning symbols and general safety rules for manual operation.

Usage Recommendations and Standard Safety Procedures

Details materials for cutting and general safety precautions for operation.

Further Safety and Machine Overview

Risk Mitigation and Noise Conditions

Addresses further safety risks and provides noise level information.

Electromagnetic Compatibility and Machine Description

Covers EMC compliance and a basic description of the machine's components.

Installation and Setup Procedures

Packaging Removal and Machine Handling

Instructions for unpacking and safely moving the machine.

Electrical Connections and Workstation Positioning

Details on power connection and optimal machine positioning for use.

Adjusting Machine Components

Blade Tension, Bar Stop, and Cutting Angle

Procedures for adjusting blade tension, bar stop, and cutting angle.

Cutting Speed and Blade Guide Adjustments

Guidance on selecting cutting speed and adjusting blade guides.

Machine Operation and Blade Management

Blade Cooling and General Working Process

Details on blade cooling system and general cutting procedures.

Blade Run-in and Vice Operation

Instructions for initial blade run-in and using the vice for clamping.

Cutting Specifications and Blade Choice

Cutting Capacity and Speed Tables

Tables detailing cutting capacity and material/speed parameters.

Blade Selection Guidance

Advice on choosing the correct saw blade for different materials.

Maintenance and Service Information

Routine Maintenance and Coolant Management

Procedures for regular upkeep and coolant fluid replacement.

After-Sales Service and Product Disposal

Details on warranty, repairs, and proper disposal methods.

Troubleshooting Common Problems

Femi NG200 Specifications

General

Brand	Femi
Model	NG200
Category	Saw
Language	English