Fender HAMMERTONE OVERDRIVE - User Manual

NOTES: UNLESS OTHERWISE SPECIFIED.
1. SINGLE-COLOR PLUS GRAYSCALE
2. USE 24 LB. BOND MATTE PAPER
3. NO-BLEED PRINTING REQUIRED
4. PAGE SIZE: 2.6 INCHES WIDE X 4.25 INCHES HIGH
5. FOLDED AND SADDLE STAPLED
6. SAMPLES OF FIRST PARTS MUST BE APPROVED BY FENDER
R&D BEFORE STARTING PRODUCTION. QTY 3 UNLESS
OTHERWISE SPECIFIED.
DO NOT PRINT
THIS PAGE
REVISIONS
REV. DESCRIPTION BY DATE
A
PART NUMBER SIZE
PRODUCT MANAGER
TITLE
REV
DATE
PROJECT ENGINEER
FENDER MUSICAL INSTRUMENTS CORP.
RESEARCH & DEVELOPMENT
CORONA, CALIFORNIA U.S.A.
THIS DOCUMENT CONTAINS INFORMATION OF PROPRIETARY NATURE TO FENDER
MUSICAL INSTRUMENTS AND IS SUBMITTED TO YOU IN CONFIDENCE AND SHALL NOT
BE DISCLOSED OR TRANSMITTED TO OTHERS WITHOUT AUTHORIZATION FROM
FENDER MUSICAL INSTRUMENTS
ANY PART SUPPLIED FOR USE
IN ANY FENDER PRODUCT
MUST CONFORM TO THE
EUROPEAN RoHS DIRECTIVE.
COPYRIGHT - 2/18/2022 -
FENDER MUSICAL
INSTRUMENTS CORP.
TITLEBLOCK REVISION: 2.1
DATE
PROJECT MANAGER DATE
B
J.O.
2.18.22
spec input impedance revised
MANUAL OWNER'S, HAMMERTONE
OVERDRIVE EFFECT PEDAL
B
7724434000
02/22/2022

Summary

Product Information

Revisions

Document revision history and details of changes made.

General Notes

Printing and production specifications for the manual itself.

Introduction

About the Hammertone Overdrive

Welcome message and overview of the pedal's capabilities and sound.

Pedal Controls

Control Panel Overview

Diagram illustrating the pedal's jacks, knobs, and footswitch layout.

Connectivity and Power

Details on audio jacks, power connection, and battery compartment.

Effect Control Knobs

Explanations for Tone, Pre-Mid Boost, Level, and Gain controls.

Footswitch and LED

Description of the LED indicator and footswitch function.

Internal Adjustments

Tone 2 Trim Potentiometer

Instructions for adjusting the internal trim pot for high-frequency character.

Safety and Specifications

Safety Instructions

Crucial safety warnings for operating the effect pedal.

Technical Specifications

Technical details including impedance, power, dimensions, and weight.

Fender HAMMERTONE OVERDRIVE Specifications

General

Type	Overdrive
Bypass	True Bypass
Technology	Analog
Mid Boost Switch	Yes
Current Draw	10 mA
Controls	Gain, Tone
Power Supply	9V DC
Inputs	1 x 1/4"
Outputs	1 x 1/4" (mono)