Need help?Do you have a question about the Fender SR-6520PD and is the answer not in the manual?
Diagram illustrating the typical signal path for the SR series.
Details the design and versatility of the SR series integrated mixer/amplifiers.
Describes line and microphone input jacks, including impedance and gain differences.
Explains main, tone, effect/reverb, and monitor controls for individual channels.
Details main master level, monitor master level, and other master section controls.
Lists and explains the various inputs and outputs on the patch bay, starting with Main Output.
Connects the built-in power amplifier to speakers; details impedance and cable gauge.
Locates and explains the function of the rear panel power switch.
Provides warnings regarding the power cord and grounding prong.
Recommends starting settings for channels, master levels, and EQ for quick setup.
Explains feedback causes and provides a procedure for room equalization.
Advises on using balanced cables, proper gauge speaker wire, and minimizing noise.
Explains the use of input pads to prevent distortion from high signal levels.
Offers guidance on patching external equipment into the mixer.
General| Channels | 6 |
|---|---|
| Phantom Power | Yes |
| USB Interface | No |
| Outputs | RCA |
| EQ | 3-band |
To Next Page
