Fender SR-6520PD - Specifications

7. SPECIFICATIONS
SR-6520PD / SR-8520PD
Part Number: 100V Version: 071-6521-270 / 071-8521-270
120V Version: 071-6521-200 / 071-8521-200
230V Version: 071-6521-260 / 071-8521-260
230V Version: 071-6521-240 / 071-8521-240 U.K.
240V Version: 071-6521-230 / 071-8521-230 AUST.
Type Specification: SR-6520PD: PR189
SR-8520PD: PR189
Power Specification: 100V Version: 100VAC, 50/60Hz, 1200W
120V Version: 120VAC, 60Hz, 1200W
230V Version: 230VAC, 50Hz, 1200W
240V Version: 240VAC, 50Hz, 1200W
POWER AMPLIFICATION SECTION:
Power Output: 520W RMS @ 2Ω
350W RMS @ 4Ω
Min. Load Impedance: 2Ω
Distortion at 520W: Less than .2% @ 1kHz into 2Ω
Input Sensitivity: 1.28V RMS
Input Impedance: 22kΩ
DELTACOMP
TM
Range: 20dB
PRE-AMPLIFIER SECTION:
LOW-Z Input Impedance: 1.82kΩ
HI-Z Input Impedance: 18.2kΩ
HI-Z Input Sensitivity for 520W: 55mV RMS
(MAIN MASTER and Channel
MAIN at maximum, all tone
controls and GEQ at "0"
detent, power amp at
520W, 4 Ω).
Channel Tone Controls: LOW +/– 15 dB at 100 Hz
MID +/– 15 dB at 750 Hz
HIGH +/– 15 dB at 10 kHz
Graphic Equalizer: +/– 12dB at 63, 125, 250, 500, 1k, 2k, 4k, 8k and
16 kHz.
PHYSICAL SPECIFICATIONS:
SR6520PD SR8520PD
Height: 10-7/16 Inches ( 26.5 cm ) Height: 10-7/16 Inches ( 26.5 cm )
Width: 23-5/8 Inches ( 60.0 cm ) Width: 27-5/8 Inches ( 70.2 cm )
Depth: 12 Inches ( 30.5 cm ) Depth: 12 Inches ( 30.5 cm )
Weight: 40.0 lbs. ( 18.2 kg ) Weight: 42.0 lbs. ( 19.1 kg )
WARNING: NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
THIS EQUIPMENT MUST BE EARTH GROUNDED.