Need help?Do you have a question about the Fender THE PELT and is the answer not in the manual?
General| Type | Fuzz Pedal |
|---|---|
| Bypass | True Bypass |
| Weight | 1.2 lbs |
| Bloom | Yes |
| Controls | Bloom, Fuzz |
| Power Supply | 9V DC (center negative) |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Enclosure | Aluminum |
Adjusts output level when fuzz is engaged. Affects overall volume.
Manages high frequencies in the signal, similar to guitar/bass tone knob.
Modifies fuzz attack, ranging from smooth to abrupt saturation.
Determines the pedal's fuzz level, adding saturation clockwise.
Enriches fuzz tone by allowing more bass frequencies through.
Shapes midrange frequencies via a three-position toggle.
Visual indicator showing when the fuzz effect is active.
Bypasses the fuzz effect, allowing for on/off switching.
High-impedance input for electric guitar, bass, and keyboards.
Low-impedance output to connect to an amplifier or next pedal.
Standard center-negative 9VDC jack for external power supplies.
Extinguishes knob LEDs to maximize battery life.
Red LED illuminates when battery voltage drops below threshold.
Avoid exposure to rain, moisture, and liquids; use only certified power adapters.
Unplug before cleaning exterior with a damp cloth; ensure dryness before reconnecting.
Use care with high sound pressure levels from amplifiers and speakers to prevent hearing damage.
Details input/output impedances, power supply requirements, and consumption.
Provides physical measurements and weight of the pedal unit.
To Next Page