FENDT IDEAL 8 Workshop Service Manual

Lubricants
IDEAL 7 IDEAL 8 IDEAL 9
Lubrication fittings AGCO Multi-Purpose Lithium II Grease
Lubrication fittings - EME
Fendt Extra Fett EP
AGCO Parts Premium EP Grease
Wheel bearings AGCO Moly III Multi-Purpose Grease
Wheel bearings - EME
Fendt Extra Fett EP
AGCO Parts Premium EP Grease
Engine oil
IDEAL 7 IDEAL 8 IDEAL 9
Quantity with filter change 33.0 L (34.9 qt) 40.0 L (42.3 qt) 40.0 L (42.3 qt)
Type AGCO MultiGuard Synthetic 10W-40 CK-4 (MAN M3775) or ACEA E9
Type - EME
Fendt Premimum
Grade 10W-40
AGCO Parts Premium
Engine Oil 15W-40
Fendt High Performance Grade 5W-30
AGCO Parts High Performance Oil 5W-30
Hydraulic oil
IDEAL 7 IDEAL 8 IDEAL 9
Total system quantity 110 L (29 gal)
Reservoir quantity 52 L (13.7 gal) minimum/68 L (18 gal) maximum/80 L (21 gal) total
volume
Type AGCO Permatran 821XL 10W-30
Type - EME
Fendt Extra Trans15W-40
AGCO Parts Premium Transmission Oil 15W-40
Transmission
IDEAL 7 IDEAL 8 IDEAL 9
Quantity 17 L (18 qt)
Type AGCO Permatran 821XL 10W-30
Type - EME
Fendt Extra Trans15W-40
AGCO Parts Premium Transmission Oil 15W-40
Main engine gearbox
IDEAL 7 IDEAL 8 IDEAL 9
Quantity (service) 6.9 L (7.3 qt)
Total system quantity (dry
gearbox with dry filter)
9.9 L (10.5 qt)
Type SAE 75W-90 synthetic gear oil
1. General
1-66 IDEAL Series Combine
79037318C

FENDT IDEAL 8 Specifications

General

Drive	Hydrostatic
Engine Type	Diesel
Max Speed	40 km/h
Unloading Rate	210 liters/sec
Cab	Yes
Engine	MAN
Transmission	Hydrostatic
Tire Options	Various options available
Cab Features	Climate control