Fenix HL45R - User Manual

(ENGLISH)Fenix HL45R Headlamp
Technical Parameters
ANSI/PLATO FL1
White light mode
Red light mode
OUTPUT
Turbo
High
Med
Low
High
Med
Low
Flash
1000
lumens
350
lumens
130
lumens
30
lumens
130
lumens
30
lumens
5 lumens
5 lumens
RUNTIME
3 hours*
4 hours
20
minutes
12 hours
40
minutes
54 hours
4 hours
20
minutes
25 hours
30
minutes
124 hours
240 hours
DISTANCE
220
meters
135
meters
82 meters
39 meters
27 meters
9 meters
4 meters
/
INTENSITY
12067
candela
4533
candela
1660
candela
375
candela
180
candela
22
candela
4 candela
/
IMPACT
RESISTANCE
1 meter
SUBMERSIBLE
IP66
Note: According to the ANSI/PLATO FL1 standard, the above specifications are from the results produced by Fenix
through its laboratory testing using one Fenix ARB-LP1900 battery under the temperature of 21±3°C and humidity of 50%
- 80%. The true performance of this product may vary according to different working environments and the actual
battery used.
*The Turbo output is measured in total of runtime including output at reduced levels due to temperature or protection
mechanism in the design.
Warning
◎Do NOT place this lamp in the reach of children!
◎Do NOT shine the lamp directly into the eyes of anyone!
◎Do NOT place light head near flammable objects, high temperatures can cause objects to overheat
and become flammable/ignite!
◎Do NOT use the lamp in inappropriate ways such as holding the unit in your mouth, doing so could
cause serious personal injury or death if the headlamp or internal battery fails!
◎This lamp will accumulate a significant amount of heat while operating, resulting in a high

Fenix HL45R Specifications