Fenix HL16 User Manual

Fenix HL16 Headlamp
Technical Parameters
ANSI/PLATO FL1 High Med Low Red Red Flash
Output
70
Lumens
30
Lumens
4
Lumens
1 Lumen
1
Lumen/2Hz
Runtime
Ni-MH
Battery
3h 7h 60h 75h 150h
Alkaline
Battery
2.5h 7h 58h 85h 170h
Distance
35m 24m 8m \ \
Intensity
310cd 143cd 16cd \ \
Impact Resistance
1m
Waterproof
IP66
The abovementioned parameters (lab-tested by Fenix using one 2500mAh Ni-MH and the
included Alkaline battery) may vary between headlamps, batteries and environments.
 Cree XP-E2 R3 neutral white LED with lifespan of 50,000 hours
 Powered by one AA (Ni-MH/Alkaline) battery
 62mm Length x 39.5mm Width x 37mm Height
 55 grams (excluding battery)
 Digitally regulated output maintains constant brightness
 Red light for night vision; red flash for alerting
 60° tilt mechanism directs the beam where needed
 One-switch control for easy and fast operation
 Reverse polarity protection to protect from improper battery insertion

Fenix HL16 Specifications

General

Brand	Fenix
Model	HL16
Category	Headlamp
Language	English

Summary

Technical Parameters

Output Specifications

Details on lumen output for Ni-MH and Alkaline batteries across different modes.

Runtime

Duration of light output for Ni-MH and Alkaline batteries in various modes.

Beam Distance

Maximum beam distance in meters for different brightness levels.

Beam Intensity

Candela ratings for different brightness levels.

Impact Resistance

Specification for resistance to drops.

Waterproof Rating

Standard for water and dust resistance.

Operating Instruction

General Mode Operation

Instructions for turning the headlamp on/off and cycling through brightness levels.

Red Light Mode

How to activate and switch between red and red flash modes.

Mode Switching

Procedure for switching between red light and white light modes.

Battery Specifications

Allowed Battery Types

Details on compatible battery types, voltages, and usability.

Battery Replacement

Battery Replacement Procedure

Step-by-step guide for opening the battery cover and inserting batteries.

Headband Assembly

Headband Attachment

Instructions for attaching the headband to the headlamp.

Usage and Maintenance

Maintenance Recommendations

Advice on O-ring wear, contact cleaning, and troubleshooting.

Important Warnings

Safety Precautions

Warning about high-intensity light and eye damage.