Fenix TK35 User Manual

Fenix TK35 2018 Flashlight
Technical Parameters
ANSI/PLATO
FL1
General Mode Flash Mode
Turbo High Med Low Eco Strobe SOS
Output
1300
Lumens
500
Lumens
150
Lumens
50
Lumens
10
Lumens
1300
Lumens
50
Lumens
Runtime
3h
10min
5h 45min
21h
30min
68h
15min
235h / /
Distance
480m 294m 161m 97m 39m / /
Intensity
57,600c
d
21,600cd 6,480cd 2,360cd 380cd / /
Impact
Resistance
1m
Waterproof
IP68, underwater 2m
Notice: The abovementioned parameters (lab-tested by using two Fenix ARB-L18-3500 18650
rechargeable Li-ion batteries) may vary between flashlights, batteries and environments.

Fenix TK35 Specifications

General

Max Lumens	3200
Water Resistance	IP68
Modes	Turbo, High, Low, Eco, Strobe
Material	Aircraft-grade aluminum
Switch Type	Dual tail switch
Lens	Anti-reflective coated glass
Length	6.26" (159 mm)

Summary

Operating Instruction

Switches

Identifies the tactical and functional switches on the flashlight.

ON/OFF

Instructions for turning the flashlight on and off using the tactical switch.

Mode Switching

How to switch between General and Flash modes.

Output Selection

Details on cycling through brightness levels in General and Flash modes.

Instant Strobe

How to activate instant Strobe mode and lock it.

Intelligent Memory Circuit

Explains how the flashlight remembers the last brightness level.

Boot-up Battery Level Indication

Describes how the battery status is indicated upon startup.

Intelligent Protection

Details on how the flashlight manages heat and output.

Low-voltage Warning

Explains the low voltage warning system and its behavior.

Charging and Battery Management

Battery Replacement

Procedure for removing and inserting batteries into the flashlight holder.

Usage and Maintenance

Recommendations for using and maintaining the flashlight.

Package Contents and Safety

Included Items

Lists the items included in the flashlight package.

Safety Warning

Safety warning about the high-intensity lighting and eye damage.