Ferm OTM1005 - Safety Warnings; Additional Safety Warnings for Multitools

4
EN
MULTITOOL
OTM1005
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
SAFETY WARNINGS
WARNING
Read the enclosed safety warnings,
the additional safety warnings and the
instructions.
Failure to follow the safety warnings and
the instructions may result in electric
shock, fire and/or serious injury.
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Risk of personal injury.
Risk of electric shock.
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
Risk of flying objects. Keep bystanders
away from the work area.
Wear safety goggles.
Wear hearing protection.
Wear a dust mask.
Do not dispose of the product in
unsuitable containers.
The product is in accordance with the
applicable safety standards in the
European directives.
Additional safety warnings for multitools
Contact with or inhalation of dust coming
free during use (e.g. lead-painted
surfaces, wood and metal) can endanger
your health and the health of bystanders.
Always wear appropriate protective
equipment, such as a dust mask. Always
use proper dust extraction during use.
• Donotworkmaterialscontainingasbestos.
Asbestos is considered carcinogenic.
• Donotworkmetalwithamagnesiumcontent
of more than 80%.
• Beverycarefulwhenworkingpaintedsurfaces.
• Donotuseaccessorieswhicharenot
specifically designed and recommended by
the manufacturer. Risk of personal injury.
• Inspectthemachineandtheaccessoriesbefore
eachuse.Donotuseaccessorieswhichare
bent,cracked,orotherwisedamaged.Ifthe
machine or one of the accessories is dropped,
inspect the machine or the accessory for
damage.Ifnecessary,replacetheaccessory.
• Onlyuseaccessoriesthatarerecommended
by the manufacturer.
• Onlyuseaccessoriesthataresuitableforthe
application.
• Onlyuseaccessorieswiththecorrect
dimensions.
• Donotuseaccessoriesthatrequireliquid
coolants. Risk of electric shock.
• Makesurethattheaccessoriesareproperly
mounted.Donotuseadaptersorotheraids
to mount accessories with another spindle
diameter.
• Makesurethatthemaximumspeedforthe
accessory is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
• Letthemachinerunatnoloadinasafearea