Fermax 9449 - F2 Functionality; User Parameter Settings Overview

18 DUOX PLUS WIFI VEO XS MONITOR
4.5 USER MENU: USER PARAMETER SETTINGS
Within the user menu, selecting the option "User parameter settings” will access a new
screencorrespondingtothevariouscongurationparameters:
The parameters are the following:
1. Melody selection
2. Date and time settings
3. Enable/disable image capture
4.Resetthecongurationparameters
5. User help
6. Enable/Disable Doormatic
Note: In this screen you can see the image
capture and Doormatic parameters disabled.
4.4 USER MENU: F2 FUNCTION
The F2 function sends an activation command to activate an auxiliary device.
Anon-screennoticationoftheactionwillbeshown:F2ONfor3seconds.
This function is contained in the main screen of the user menu.
The F2 command is sent by the bus, including the monitor address, to activate the auxiliary
devices connected to the bus, such as for example a duox plus relay, (check with your
installer).
F2
F2
ON
F2
_ _ : _ _
_ _ : _ _
F2
_ _ : _ _
_ _ : _ _