Fermax 9449 - Image Capture Settings

DUOX PLUS WIFI VEO XS MONITOR 21
31/01/2019 00:00
The monitor allows you to adjust the date
and time, if it is not paired.
Via the navigation icons, you can change
the date and time settings and browse
the same. Press the icon toconrm
the selection.
Notes:
- You are not permitted to validate an incorrect date and time.
- Holding down the navigation icons - will cause the numbers to change
more quickly.
If the power supply is cut off for any reason, the date and time settings will reset to the default
conguration (01/01/2019). An icon will appear on the user menu and on the video display
warning that the date is incorrect.
0
_ _ : _ _
With this option, you can enable or disable the automatic capture of images. Select the
imagecaptureiconandpressconrm to activate or deactivate it.
The monitor can take an automatic picture within 3 seconds of receiving a call from an
outdoor panel. According to the European Union legislation about data protection ((EU)
2016/679), the capture of images may be restricted. This feature is deactivated by default
in all monitors, although can be activated at your own responsibility.
Furthermore, the legislation may force to place a sign next to door stations, indicating
that monitors can capture images. You can download it at https://www.fermax.com/intl/
en/corporate/utilities.html.
4.5.3 User parameter settings: ENABLE/DISABLE IMAGE CAPTURE
F2
_ _ : _ _
_ _ : _ _
99