Fermax CITY FINGERPRINT READER - Page 12

Pag 12
FINGERPRINTFINGERPRINT
FINGERPRINTFINGERPRINT
FINGERPRINT
FINGERPRINTFINGERPRINT
FINGERPRINTFINGERPRINT
FINGERPRINT
d 1. 2
0 0 0 1
d 1. 1
0 y
A u
REMOTE UNIT
FOR ACCES CONTROL
+
321
7 8 9
0
x
-
654
REMOTE UNIT
FOR ACCES CONTROL
+
321
7 8 9
0
x
-
654
r e L a
E o t h
A u
d 2. 1
d 2
REMOTE UNIT
FOR ACCES CONTROL
+
321
7 8 9
0
x
-
654
0 0 0 2 r e L a
E o t h
REMOTE UNIT
FOR ACCES CONTROL
+
321
7 8 9
0
x
-
654
REMOTE UNIT
FOR ACCES CONTROL
+
321
7 8 9
0
x
-
654
P r o E
d 1. 1
4. d1.2 is shown. Re-enter the user fingerprint you wish to register to confirm the fingerprint.
1 beep
1 beep
1 beep
3. d1.1 is shown. Enter the user fingerprint you wish to register in the system.
1 beep
1 beep
1 beep
5. Relay is shown. Using the scroll keys the following sequence will appear relay, both, Au.... There are three
options the action of which associated with this user fingerprint is:
- Relay: to open the door
- both: to open the door and activate the auxiliary exit simultaneously.
- Au: to activate the auxiliary exit
Select the required option and confirm using the OK key.
6. d2 is shown. Confirm the second fingerprint option using the OK key Enter the user fingerprint you wish to use
for the functions described in fingerprint mode 2.
1 beep
for example: Au
(to activate the auxiliary exit)
1 beep
6b. The reader LEDs start to flash. The reader is ready (LEDs flashing) for a card or code to be entered (if the
reader has a keypad).
7. Bring close the card that you wish to register. If it has registered correctly d1.1 is shown.
1 beep 1 beep