another panel
Clone? (A=Yes)
4
B
A time (1-99)
03
A time (1-99)
03 OK
(Cp) USER CODE
This function allows administrator to set a new programming
code (default value 19025).
This function is hidden to prevent errors. It must be used to set
up a new administrator code (default value 24797).
(6) ADMINISTRADOR CODE
Tools menu
(Cl) CLONE
The digital directory can copy user list to another digital directory
device (very useful if 2 Digital Directories installed).
System will require the number of the panel where data is to be
copied to. Dial ‘A’ to confirm or ‘B’ to cancel the process.
To use this function, both devices must be connected using Sa
and Sb (bus data terminals).
Times (Electric lock activation time)
This option from main menu begins electric lock activation time programmation sequence.
(tA) A time
Door activation from house terminal (monitor and telephone)
and the outdoor panel (using the access control feature)
Allowed values are defined between 1 and 99 seconds.Confirm
entered value pressing ‘B’ key.
To Next Page
