Pag 30
VDS - BVDS - B
VDS - BVDS - B
VDS - B
US2US2
US2US2
US2
VDS - BVDS - B
VDS - BVDS - B
VDS - B
US2US2
US2US2
US2
VDS/B-2 V2.0
Sending...
RESET system
to update values
B
B time (0-99)
06
B time (0-99)
06
(tB) B time
‘B time’ defines electric lock activation activation from the panel:
by pressing the open button (indoor).
Allowed values are defined between 1 and 99 seconds.
Confirm entered value pressing ‘B’ key.
Reset system
Finally, system ends sequence asking for a hardware reset to
enable new parameters. Turn off the power to end sequence.
After re-powering up the system, the display will notice the
synchronization process with the amplifier (device that makes
electric lock activations): ‘Sending...”
To Next Page
