Fermax DUOX plus 970049b - Page 28

Pag 28
Pag 28
Default values of the parameters:
- Lock-release activation time: 01..99 sec. (By default: 03).
- Exit button activation time: 00..99 sec. (By default: 06).
- Maximum conversation time: 90 sec.
- Panel type: sub-block/block/general, (default: block).
- Block number: 00..99, (By default: 00).
- Sub-Block number: 00..99, (By default: 00).
- Panel number: 0..9, (By default: 0).
- Door sensor time: 000..250, (By default: 000, not active).
- Opening code: 0000..9999, (By default: not active).
- Programming code: 0000..9999, (By default: 4444).
- MASTER Panel.
- Monitoring volume: 0..9, (By default: 5).
- Buttons´ sequential programming time after activity has
stopped: 60 secs
- Buttons´ inverse programming time after activity has stopped:
300 secs.
Capacities:
• Maximum number of pushbuttons: 99.
• Calls from the Keypad panel:
- Sub-Block: 99.
- Block: 9999.
- General Entrance: 999999.
• Number of Panels:
- General entrances: 10 (0-9).
- Block: 10.
- Sub-Block: 10.
Default values of the parameters:
- Lock-release activation time: 01..99 sec. (By default: 03).
- Exit button activation time: 00..99 sec. (By default: 06).
- Maximum conversation time: 90 sec.
- Panel type: sub-block/block/general, (default: block).
- Block number: 00..99, (By default: 00).
- Sub-Block number: 00..99, (By default: 00).
- Panel number: 0..9, (By default: 0).
- Door sensor time: 000..250, (By default: 000, not active).
- Opening code: 0000..9999, (By default: not active).
- Programming code: 0000..9999, (By default: 4444).
- MASTER Panel.
- Monitoring volume: 0..9, (By default: 5).
- Buttons´ sequential programming time after activity has
stopped: 60 secs
- Buttons´ inverse programming time after activity has stopped:
300 secs.
Capacities:
• Maximum number of pushbuttons: 99.
• Calls from the Keypad panel:
- Sub-Block: 99.
- Block: 9999.
- General Entrance: 999999.
• Number of Panels:
- General entrances: 10 (0-9).
- Block: 10.
- Sub-Block: 10.