Fermax DUOX plus 970049b - Restore Default Values and Reset Procedures; Reset Mapping (Call Button Code); Lock Release Time Configuration; Parameter Reset via Keypad

Pag 29
Pag 29
RESTORE DEFAULT VALUES: RESET
The DUOX amplier has a ‘Reset’ function which can be used to
restore programmed default parameters.
RESET to default parameter values (via keypad)
You can Reset the parameters to the factory default values. For
this you must temporarily connect a keypad (ref. 7439) to enter
the numeric values. Download the Duox Video Direct Panels
Programming Manual, cod. 970052 at www.fermax.com.
To change the door opening times, see Voice Assisted
Conguration of Pushbutton Panels code 970048.
You can also set it by temporarily connecting a keypad (ref.
7439), (download the Direct Video Duox Panel Programming
Manual, cod. 970052, at www.fermax.com).
Lock Release Times
1º- Reset amplier: remove power.
2º- With the SW1 button pressed, power and maintain the SW1
button for 5 seconds. The LED will blink quickly to indicate
that button mapping has been restored.
RESET Mapping (call button code)
RESTORE DEFAULT VALUES: RESET
The DUOX amplier has a ‘Reset’ function which can be used to
restore programmed default parameters.
RESET to default parameter values (via keypad)
You can Reset the parameters to the factory default values. For
this you must temporarily connect a keypad (ref. 7439) to enter
the numeric values. Download the Duox Video Direct Panels
Programming Manual, cod. 970052 at www.fermax.com.
To change the door opening times, see Voice Assisted
Conguration of Pushbutton Panels code 970048.
You can also set it by temporarily connecting a keypad (ref.
7439), (download the Direct Video Duox Panel Programming
Manual, cod. 970052, at www.fermax.com).
Lock Release Times
1º- Reset amplier: remove power.
2º- With the SW1 button pressed, power and maintain the SW1
button for 5 seconds. The LED will blink quickly to indicate
that button mapping has been restored.
RESET Mapping (call button code)