DUOX WIFI VEO XS MONITOR 33
5. FUNCTIONING: IMAGE DISPLAY
Function allowing you to see all images captured. The image capture function must be pre-se-
lected.
See chapter 4.5 User Menu - 4.5.3 Activation/Deactivation of images.
When a call is made from the outdoor panel, (the image capture function must be pre-selected), a
photo is automatically taken 3 seconds later and stored in the memory.
Select the icon
99
to display the various
photos taken.
The most recent image will be displayed
with the date, time and the photo number.
Note: The maximum number of images that can be stored is 150, if a new image is stored
while the memory is full, the oldest image will be erased.
4. FUNCTIONING: CALL VOLUME CONTROL (POTENTIOMETER)
While the device is in its idle state, you may slide the potentiometer to adjust the call volume
to a value between the minimum and the maximum (10 volume levels are available), and
the volume will be displayed on the monitor screen:
Notes:
- These adjustments will affect all melodies generated by the monitor, whether those
of the outdoor panel or the doorbell.
- If the Do Not Disturb mode is active, you may reactivate the call by sliding the po-
tentiometer to any position other than the minimum.
- As the volume adjustment can be made from the on-screen menu and from the
potentiometer, the latest change effected will prevail.
- The ring tone volume can be adjusted with the potentiometer through:
• On standby: Melody volume.
• Conversation in progress: Upstream audio setting.
Potentiometer
10/04/2019 09:28 130 / 149
F2
99
To Next Page
Loading...
Need help?
General
