Pag 35
Example: We are going to select TRANSFER mode so that the panic calls are
transferred to the Guard Unit in block nº 4.
1. Enter programming and select TRANSFER mode with the
arrow keys, as explained on the previous page.
After confi rming, the system will ask for the number of the
Central Unit (block) the calls are to be diverted to.
2. Key in the number of the block where the Guard Unit the
calls are to be transferred to, using 2 digits at all times.
In the example, "04".
The display goes back to the standby position.
NOTE:
The central unit designated must have a Guard Unit in panic mode active
(DAY or MASTER DAY panic mode)
N. central: 04
FIND NAME AND
PRESS
N. central:
To Next Page
Loading...
