Ferno 24 - Symbol Glossary; Safety and Instruction Labels

© Ferno-Washington, Inc. / 234-0008-09 / February 2018
5
Safety Information
Do Not
Lubricate
LubricateUnlocked Locked
Product meets
European Union Standards
Manufacturer Authorized Representative in the
European Community
1.6 Symbol Glossary
The symbols dened at right are used on the cot and/or in this’
manual. Ferno uses symbols recognized by the International Standards
Organization (ISO), American National Standards Institute (ANSI) and
the mortuary services industry.
Load Capacity
(Safe Working Load in
pounds, kilograms, stone)
400 lb
181 kg
28.5 st
General Warning of
Potential Injury
Pinch Point:
Keep Hands Clear
Operation Requires
Two Trained Operators
1.7 Safety and Instruction Labels
Safety and instruction labels place important information from the
users’ manual on the cot. Read and follow label instructions. Replace
worn or damaged labels immediately.
Read the Users’ Manual
Loading-end Label: Identies the
function of the loading-end control
handle.
24, 24H Series
Operator-end Label: Identies the cot, provides safety and load capacity information, and identies the function of the control-end control handle.