29
© Ferno-Washington, Inc 234-3396-00 January 2011
KED® Pro Storing the KED® Pro
7.1 Storing the KED® Pro
If you properly prepare the KED
®
Pro before placing it in its
carrying case you will be able to unpack and deploy it for
use quickly and smoothly.
TORSO STRAPS
Fold each torso strap accordion style and secure it in its
elastic retainer as follows:
1. Lengthen the strap until only three or four nger-
widths of webbing have not passed backward through
the male half of the buckle.
2. Turn the male half of the buckle ush against the
webbing (Figure 57)
3. Makethe rst foldbeneath the buckle(Figure 58) and
continue folding the strap accordion fashion (Figure 59).
4. When all the webbing is folded, secure it in the elastic
keeper (Figure 60).
5. Make sure to position the folded strap so the keeper
wraps around the center of the male buckle half. This
will enable you to pull the strap free without tangles,
and have the buckle in your hand, in a single motion.
7 STORING THE KED® PRO
Figure 57 - Turning the Buckle Flush With the Webbing
Figure 58 - Making the First Fold
Figure 59 - Folding Accordion Fashion
Figure 60 - Buckle Tang In Elastic Retainer
To Next Page
Loading...
