9
Installation and connections
Physical damage!
Do not use the cover and/or handle to carry or move the product.
Product should be carried by two persons at least.
Electric connection
The product should be used with an earth line definitely!
The manufacturing company will not be responsible
for any damages if used without earth line.
Electric shock, short circuit or fire risk due to installation performed
by unqualified persons! Connection of the product to the mains
may be performed only by an authorized and licensed person and warranty
of the product starts immediately after installation only.
Electric shock, short circuit or fire risk due to damaged power cable!
Power cable should not be crushed, folded or pinched or touch hot parts of
the product. If the power cable gets damaged, it should be replaced by a
qualified electrician.
Mains supply data should be same with the data specified on the
type label of the unit. You may find the type label on the rear of the
product.
Connection cable of the product should comply with the technical
specifications and power consumption.
L1L
N N
L2
L3
To Next Page
Loading...