28
Some detergents or cleaning agents may damage the surface. Do not
use aggressive detergents, cleaning powders/creams or sharp objects for
cleaning.
Do not use steam cleaning products for cleaning.
Cleaning the control panel
Wipe clean the control panel and control buttons by a damp cloth and wipe
dry by a cloth.
The control panel may be damaged! Do not remove the control
button to clean the control panel.
Cleaning the cooker
Cooker cleaning agent or any other special cleaning agents are not required
to clean the cooker. You are recommended to wipe the cooker by a damp
cloth when it is warm.
Cleaning the cover of the cooker
Do not use hard and aggressive cleaning materials or metal scrappers to
clean the cover of the cooker; these material may scratch the surface and
given damage to the glass.
Replacement of the cooker light
Hot surfaces may cause burns!
1. Open the cover of the cooker.
Prior to replacement of the cooker light, disconnect the power and allow it
to cool down to eliminate risk of electric shock.
Cooker light is a special electric light resistant to 300
o
C.
For the specifications of the light, seeTechnical characteristics, p. 3.
You may have cooker lights from the Authorized Service Center.
Position of the light may be different from the one shown
in the picture.
To Next Page
Loading...