18
Digital timer is an electronic timing module that enables your food in the
cooker to be ready for service at any time you desire. To this end, simply
program the cooking time and the time of service you desire.
Furthermore, it may also be used as alarm clock independently from the
cooker.
WHEN POWERED
When it is powered first, the time and the term Auto flashes. No cooking
program can be performed in this status. The time seen on the display is
not correct and it should be set (see Time setting). To program for cooking,
you should switch to the manual mode (see Manual mode)
MANUAL MODE
When you press the keys
and simultaneously,
it switches to the manual mode.
Press both buttons at the same time.
TIME SETTING
Time setting may be made only when there is no current cooking . Switch to
the manual mode. On the display, two points start flashing between the
hour and minute; you may set the clock forward (+) or backward (-). When
you press these buttons long, it will change the clock fast.
To Next Page
Loading...