To Next PageTo Next Page
Need help?Do you have a question about the FERREX BTS920 and is the answer not in the manual?
Explains safety symbols like goggles, hearing protection, and respiratory protection.
Details symbols for compliance, warranty period, and warranty class.
Clarifies symbols indicating attention, caution, and warning, detailing risk levels.
Welcomes user, highlights product quality and 5-year warranty.
Details product liability limitations and advises reading instructions before use.
Lists and labels all parts of the belt and disc sander as shown in Figure 1.
Details all items included in the package with the belt & disc sander.
Specifies the intended applications for the belt & disc sander, primarily for wood sanding.
Outlines restrictions on use, including commercial applications and modifications.
Covers maintaining a clean, well-lit area and keeping bystanders away.
Addresses plug compatibility, avoiding wet conditions, and cord safety.
Emphasizes staying alert, using PPE, and preventing unintentional starting.
Details safe operation, maintenance, and storage of the power tool.
Guidance on servicing by qualified personnel and using genuine parts.
Covers machine assembly, operation by trained personnel, and material limitations.
Details safe practices like workpiece handling, belt direction, and clearances.
Step-by-step guide to attach the sanding disc to the machine.
Instructions for installing the support screw and its nut.
Details mounting the table (two options) and inserting the miter gauge.
Guide on securing to workbench and connecting a dust collector for safety.
Crucial warning to ensure the machine is OFF and unplugged before any adjustments.
Covers belt tracking, housing angle adjustment, and surface sanding techniques.
Details switching the machine on/off and performing bevel sanding.
Techniques for sanding with the disc and using the mitre gauge with the table.
Instructions and warnings for sanding inside curves on the sanding belt.
Steps for cleaning safety devices, air vents, and lubricating moving parts after use.
Detailed instructions for changing the sanding disc and replacing the sanding belt.
Details dimensions, disc size, speeds, belt size, tilt angles, weight, and motor power.
Provides sound pressure and power levels, and advice on hearing protection.
Recommends storing the machine in a dark, dry place at specific temperatures.
Emphasizes securing the appliance against falling or turning during transport.
States compliance, warns on damaged cables, specifies motor specs, and recommends circuit breakers.
Instructs on recycling packaging and disposing of defective equipment at collection centers.
Addresses issues like motor, cable, or plug defects and fuse problems.
Troubleshoots slow motor start, low voltage, or capacitor issues.
Covers motor noise, defective coils, or power reduction due to network or overloading.
Details the 60-month guarantee, covering defects under normal use.
Explains consumer rights under Australian law for major failures and acceptable quality.
Warns users about potential data loss on devices sent for repair and advises data backup.
Informs about the possibility of using refurbished parts or goods that meet quality standards.
Provides contact information for escalating repair or service complaints.
General