Need help?Do you have a question about the FERREX DC-180E-1 and is the answer not in the manual?
Defines QR codes as a matrix readable by smartphone cameras, containing website or contact links.
Explains QR code scanning requires a smartphone with QR reader software and internet connection.
Encourages users to scan QR codes to find more information about purchased Aldi products.
Guidance for first-time or inexperienced users on operating the Rotary Tool, including starting/stopping and maintenance.
Specifies the tool is for private domestic DIY use, not commercial, and for engraving/delicate grinding tasks.
Ensures a clean, well-lit workspace and keeps children and bystanders away during operation.
Covers proper plug matching, avoiding contact with grounded surfaces, and using outdoor-suitable extension cords.
Emphasizes staying alert, using PPE, preventing unintentional starting, and proper footing/balance.
Advises against forcing the tool, using faulty switches, and proper disconnection before adjustments.
Recommends servicing by qualified personnel using identical replacement parts for safety.
Suggests the tool should always be supplied via a residual current device (RCD) rated at 30 mA or less.
Explains kickback, its causes (pinched/snagged accessory), and how to avoid it.
Instructions for attaching sanding bands to the sanding shank by inserting them together.
Steps to attach cutting discs using the mandrel, involving screws and washers.
Procedure to insert a tool by pressing the spindle lock button and tightening the tool holder.
Procedure to remove a tool by pressing the spindle lock button and loosening the tool holder.
Steps to connect the adapter and use the on/off switch to start or stop the tool.
Notes on safe operation of the mini drill, including testing on a small spot and securing the workpiece.
General| Brand | FERREX |
|---|---|
| Model | DC-180E-1 |
| Category | Power Tool |
| Language | English |
To Next Page
