How to fix FERREX TD9511 that cannot be switched on?
If your FERREX Power Tool won't switch on, first ensure the socket is working by testing it with another device. Then, check that the mains plug is fully inserted into the socket. If the switch is stuck, clean it according to the cleaning and maintenance guidelines.
What to do if tool holder does not move on FERREX TD9511?
What to do if the tool holder on your FERREX Power Tool doesn't move after switching it on? It might be due to dirt, wood chips, or other objects lodged in the tool holder gap. Unplug the power tool and clean the gap, using a vacuum cleaner if necessary.
Why oscillation speed cannot be changed on FERREX TD9511 Power Tool?
If you can't increase or decrease the oscillation speed on your FERREX Power Tool, the speed control might be dirty. Try cleaning the speed control and the surrounding area with a vacuum cleaner.
Control for turning the tool on and off.
Dial to adjust the tool's oscillation speed.
Part where accessories are attached.
Blades for cutting metal and wood.
Accessory for removing materials like paint.
Blade for cutting in confined spaces.
Abrasive sheets and backing plate for sanding.
Component used with certain accessories.
Fastener for securing accessories.
Tool for tightening screws.
Instructions for reading, storing, and using the user manual.
Defines warning symbols and signal words used in the manual.
Specifies intended use and prohibits misuse of the tool.
Highlights inherent risks that cannot be eliminated despite proper use.
Standard safety guidelines applicable to all power tools.
Ensures a safe working environment, free from hazards.
Precautions to prevent electric shock during operation.
Guidelines for user safety, including PPE and alertness.
Instructions for correct operation, maintenance, and storage.
Information on servicing and repairs by qualified personnel.
Measures to take for fire prevention during operation.
Precautions for users with medical implants like pacemakers.
Instructions for checking the tool and its accessories upon receipt.
Explains how the multifunction-tool works (oscillation).
Lists materials that can be processed with each accessory.
Steps to prepare the tool before use.
Initial steps for operating the multifunction-tool.
Steps to safely stop and disconnect the tool.
Information and warnings regarding tool repairs.
Presents noise emission levels measured according to standards.
Details vibration emission values for hand and arm.
Instructions for proper disposal of product packaging.
Legal requirements for discarding the used multifunction-tool.
General| Brand | FERREX |
|---|---|
| Model | TD9511 |
| Category | Power Tool |
| Language | English |
To Next Page
