To Next PageTo Next Page
Need help?Do you have a question about the Ferris 1000z Series and is the answer not in the manual?
General| Brand | Ferris |
|---|---|
| Model | 1000z Series |
| Category | Lawn and Garden Equipment |
| Language | English |
Key safety guidelines for operating the mower and collection system, emphasizing understanding controls and safe practices.
Importance of understanding and adhering to safety labels on the equipment for safe operation.
Procedures for mowing effectively with grass collection systems attached, including speed and cutting height.
Pre-operation checks for efficient bagging, ensuring deck and catcher are clear and fit snugly.
Post-operation cleaning and maintenance, including checking catcher screens and bags.
Guidelines for proper storage of the grass catcher to prevent corrosion and damage.
Instructions for operating the mower without the blower assembly attached.
Steps to remove the discharge chute before installing the collection system.
Procedure to safely release tension on the mower drive belt.
Steps for removing the belt guard and spindle pulley assembly.
Instructions for installing the new double spindle pulley and drive belt.
Steps for installing the new deck guard.
Preparing the mower deck for blower mount installation.
Attaching the quick connect bar to the mower deck using specific hardware.
Preparing the blower housing for mounting, including idler arm installation.
Attaching the blower mount plate to the blower housing.
Installing the blower bearing and eyebolt assembly onto the blower housing.
Final installation steps for the blower and belt guard assembly.
Steps to remove the discharge chute for installation of the triple-bag system.
Procedure to safely release tension on the mower drive belt.
Steps for removing the belt guard and spindle pulley.
Instructions for installing the new double spindle pulley.
Installing the blower mount bar and belt guard.
Preparing the blower housing, including idler arm installation.
Installing the blower bearing and spring assembly.
Attaching the blower brace to the mower deck.
Final installation of the blower assembly and belt guard.
Procedure for operating the mower with the deflector properly installed.
Steps to properly reattach the discharge chute using retainer pins and clips.
Visual guide to common hardware components like bolts, nuts, and washers.
Explanation of how to interpret hardware size designations and measurements.
Table of recommended torque values for various hardware grades and sizes.
Visual guide for selecting appropriate wrenches for common fasteners.
