Ferris 300e - Features and Controls

1. Put a two (2) feet long straight edge (A) ora straight
piece of metal alongthe steepest part of the lawn slope.
2. Put the board up and down the slope.
3. Put your smartphone or angle finder tool on the straight
edge. Read the angle in degrees. This is the slope of
your lawn.
NOTICE
A paper gauge slope identification guide is included in your
product literature packet. You can also download it from the
manufacturer's website.
Features and Controls
Compare the features and controls in Figure 4 with the table
that follows.
4
Ref. Description Icon(s) Function /
Operation
A Parking Brake Engages parking
brake. See
Operation >
Parking Brake
Operation.
B Parking Brake
Lock
Locks parking
brake. See
Operation >
Parking Brake
Operation.
Ref. Description Icon(s) Function /
Operation
C Right Ground
Speed Control
Lever
Controls speed
and direction of
right drive wheel.
See Operation >
Ground Speed
Control Lever
Operation.
D Left Ground
Speed Control
Lever
Controls speed
and direction of
left drive wheel.
See Operation >
Ground Speed
Control Lever
Operation.
E Mower Deck -- Houses mower
blades.
F Operator Seat See Maintenance >
Seat Adjustment.
G Battery
Compartment
-- Houses battery.
H Display / Control
Console
Displays critical
rider and mower
deck information.
Also controls
ground speed
and mower blade
speed settings.
See Operation >
Display / Control
Console.
I Key Switch Turns unit power
on and off.
Requires key. See
Operation > Start
the Unit.
J PTO Switch Engages and
disengages mower
blades. See
Operation > PTO
Switch Operation.
K Charge Port -- Connection point
for battery charge
source. See
Operation > Charge
the Battery.
L Deck Lift Pedal,
Cutting Height
Adjustment Pin
and Deck Lift
Lock Level
Adjusts cutting
height. See
Operation > Cutting
Height Adjustment.
6 ferrismowers.com
Not for
Reproduction