Ferris FAST-Vac - User Manual

Questions and Answers

J
joshua57Aug 11, 2025
Why is my Ferris FAST-Vac vibrating excessively?
- S
  Sandra Gonzales MDAug 11, 2025
  Excessive vibration in your Ferris Lawn Mower can stem from several issues. The cutting blades might be bent or unbalanced, requiring replacement. Check if the blade mounting bolts are loose and tighten them to 70 ft-lbs (94 Nm). A loose or excessively worn blower pulley could also be the culprit, so tighten or replace it as needed. Finally, bent or broken blower impeller blades can cause vibration, and you should consult your dealer in this case.
T
Thomas DavisAug 21, 2025
What to do if there is excessive grass blowout from the Ferris Lawn Mower deck?
- J
  john07Aug 21, 2025
  If you're experiencing excessive grass blowout from your Ferris Lawn Mower deck, first check if the collection bags are full and empty them. Also, inspect the blower or discharge tube for any blockages and remove any debris you find. Lastly, consider that your ground speed might be too fast; try using a slower speed.
D
Deborah NunezAug 30, 2025
Why are the blower and discharge tube plugging frequently on my Ferris FAST-Vac?
- C
  corey77Aug 31, 2025
  Frequent plugging of the blower and discharge tube in your Ferris Lawn Mower can occur for several reasons. Ensure that collection bags are emptied regularly. Reduce your ground speed, as moving too fast can cause blockages. Avoid cutting grass when it is too wet, and if the grass is too long, raise the deck height setting. A worn, loose, or broken blower belt can also cause this issue, so replace it with a new one if necessary.