24
www.ferrisindustries.com
Maintenance
Maintenance Schedule
The following schedule should be followed for normal care of your rider and mower. You will need to keep a
record of your operating time. Determining operating time is easily accomplished by observing the elapsed time
recorded by the hour meter.
RIDER MAINTENANCE
Before Each Use
Check Safety Interlock System
Check Rider Brakes
Check Rider / Mower for Loose Hardware
Check Hydraulic Oil Level
Every 25 Hours
Check Deck & Check/Replace Mower Blades*
Lubricate Rider & Mower*
Check Tire Pressures
Intial Check of PTO Clutch
Every 100 Hours
Check Mower Blade Stopping Time
Check/Adjust PTO Clutch
Clean Battery & Cables
Every 250 Hours
Change Hydraulic Oil & Filter
ENGINE MAINTENANCE
Before Each Use
Check Engine Oil Level
Every 25 Hours
Check/Clean Cooling Fins & Intake*
Every 50 Hours
Check/Clean Spark Arrester**
Refer to Engine Owner’s Manual
Service Air Filter
Change Oil & Filter
Check/Replace Spark Plugs
Check/Replace Fuel Filter
* More often in hot (over 85° F: 30° C) weather or
dusty operating conditions.
** If equipped. Replace if damaged.
* More often in hot (over 85° F: 30° C) weather or
dusty operating conditions.
Regular Maintenance
To Next Page
Loading...
Need help?
General
