Need help?Do you have a question about the Ferris IS600 Series and is the answer not in the manual?
General| Cutting Width | 44, 52, or 61 inches |
|---|---|
| Transmission | Hydro-Gear ZT-3100 Transaxles |
| Deck Type | Fabricated |
| Engine Type | V-Twin |
| Cutting Height | 1.5 - 5 inches |
| Engine Brand | Kawasaki |
| Engine Manufacturer | Kawasaki |
| Deck Material | 10-gauge steel |
| Horsepower | 24 HP |
| Engine Power | 24 HP |
Locates product identification tag and lists covered products.
Explains safety alert symbols and signal words used in the manual.
Provides warning about diesel exhaust exposure known to cause cancer.
Provides rules for safe operation and warns about deck hazards.
Warns about tragic accidents involving children near the mower.
Details dangers of operating on slopes and maximum safe angle.
Warns about hazards from moving parts and safety systems.
Warns about thrown objects from mower blades and safety devices.
Instructs on proper use of the roll bar and seat belt for safety.
Warns about hazards near retaining walls, drop-offs, and water.
Warns against operating the unit in enclosed or unventilated areas.
Explains how to measure lawn slopes using tools.
Provides comprehensive safety rules for operation and training.
Details pre-operation checks and safety clothing requirements.
Lists general safe operating practices and procedures.
Detailed instructions and warnings for operating on slopes.
Reinforces safety precautions regarding children near the mower.
States engine exhaust contains chemicals known to cause harm.
Provides detailed safety instructions for handling gasoline.
Covers safe refueling, storage preparations, and general upkeep.
Warns about hot engine parts and fire hazards from fuel/debris.
States engine maintenance should only be done by authorized personnel.
Lists crucial operational warnings for using the roll bar safely.
Details procedures for inspecting the roll bar structure for safety.
Explains how to inspect and maintain the seat belt and its retraction mechanism.
Details safety checks and conditions for engine crank/shut off.
Briefly describes the function of individual controls and their locations.
Illustrates and names the zero-turn rider controls.
Explains the operation of the deck lift pedal, pin, and lock lever.
Explains how the lockout plate prevents the deck from locking.
Describes how ground speed control levers affect speed and direction.
Indicates the fuel level in the tank.
Details options and adjustments for the suspension seat.
Explains seat belt usage and safety, especially with the roll bar.
Describes how the seat latch secures the seat plate.
Notes fuel cap removal and power outlet presence.
Explains how to remove the floor plate for deck access.
Explains how to engage and disengage the mower blades.
Details the functions of the digital display panel and its buttons.
How to set engine throttle speed using display buttons.
How to access options like service reminders and fault codes.
Key safety and operational steps before using the mower for the first time.
Lists essential checks to perform before starting the engine.
Details the procedure for priming the fuel system before starting.
Step-by-step instructions for starting the engine safely.
Explains how to adjust throttle speed using the digital display buttons.
Provides the procedure for safely stopping the rider.
Guide to practicing basic forward and reverse zero-turn movements.
Practicing forward and reverse movements and turning.
How to practice turning the rider around corners and in place.
Technique for performing a zero-turn at the end of a cutting row.
Steps to prepare for and begin mowing operation.
Guidance on optimal grass height for cutting and its impact.
Different mowing patterns and techniques for optimal results.
Advice on the best time of day and frequency for mowing.
Details broadcasting and mulching mowing methods.
Instructions on how to push the unit by hand after disengaging pumps.
Step-by-step instructions for raising and lowering the roll bar.
Guidelines for safely attaching a trailer and weight limits.
Instructions for temporary storage of the unit.
Detailed steps for storing the unit for extended periods.
Procedures for preparing the unit after long-term storage.
Information on diesel fuel types and seasonal blends.
Safety precautions for performing service and maintenance procedures.
Procedures to avoid damage when welding on the unit.
Lists control icons for the digital display panel and their names.
Instructions to change display units, language, time, and brightness.
How to view and reset service reminders on the display.
Warns about static electricity risks when fueling with ULSD fuel.
Step-by-step guide for replacing fuel filter and water separator elements.
Recommends API CK-4 oil and SAE viscosity grades based on temperature.
Safety and procedures for cleaning the engine compartment.
Refers to the engine operator's manual for maintenance schedules.
Instructions for containing fluids and proper disposal of waste.
Refers to engine owner's manual for coolant change procedures.
Instructions for cleaning the radiator, screen, and oil cooler fins.
Instructions for changing the hydraulic oil filter.
Instructions for changing the gearbox oil.
Instructions for lubricating front caster wheel axles and yoke axles.
Step-by-step instructions for removing mower blades.
Guidance on inspecting mower blades for wear and damage.
Instructions for sharpening mower blades safely and correctly.
Procedure for balancing mower blades to prevent vibration.
Instructions for installing mower blades correctly.
Instructions for adjusting the height of the head rest assembly.
Adjusting alignment and placement of ground speed control levers.
Balancing wheel speeds for straight travel and reducing faster wheel speed.
Operation of the lockout plate to prevent deck locking.
Instructions for removing and installing the floor pan.
How to operate the hood latch to open the hood.
Adjusting the neutral position of ground speed control levers.
Adjusting the reverse return spring length.
Procedure to check the timing of the deck lift rod linkages.
Detailed steps for adjusting the deck lift rod timing.
Steps to check if deck leveling adjustment is required.
Step-by-step guide for adjusting the mower deck level.
Instructions for installing camber shims to adjust rear tire angle.
How to check battery voltage using a voltmeter.
Safety precautions and steps for charging a dead battery.
Step-by-step guide and safety for jump starting the unit.
Guides for diagnosing and resolving common engine and unit problems.
Identifies common cutting issues and their causes/remedies.
Covers scalping, stringers, stepped, and uneven cutting issues.
To Next Page