EasyManuals Logo

Ferris IS600 Series User Manual

Ferris IS600 Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Not for
Reproduction
3
General Information
Thank you for purchasing this quality-builtFerrisZero-
Turn Riding Mower. We’re pleased that you’ve placed
your confidence in theFerrisbrand. When operated and
maintained according to the manuals, yourFerrisproduct will
provide many years of dependable service.
The manuals contain safety information to make you aware
of the hazards and risks associated with the unit and how to
avoid them. This Zero-Turn Riding Mower was designed to
be used as described in operator's manual and operated by
trained professionals for finish cutting of established lawns
and is not intended for any other purpose. It is important that
you read and understand the instructions thoroughly before
attempting to start or operate this equipment.Save these
original instructions for future reference.
The images in this document are representative, and
are meant to complement the instructional copy they
accompany. Your unit may vary from the images
displayed.LEFTandRIGHTare as seen from the operator's
position.
Ferris is a registered trademark of Briggs & Stratton.
Identifying Your Unit
The following products are covered by this manual:
5901849
The product identification tag (A, Figure 1) can be found in
the location as shown in Figure 1.
1
If the mower deck is shipped separately from the zero-turn
riding mower the product identification tag (A, Figure 2) for
the mower deck is located as shown in Figure 2.
2
PRODUCT REFERENCE DATE
Unit Model Number:
Unit Serial Number:
Mower Deck Model Number (if
applicable):
Mower Deck Serial Number (if
applicable):
Dealer Name:
Date Purchased:
ENGINE REFERENCE DATA
Engine Make:
Engine Model:
Engine Type / Specification:
Engine Code / Serial Number:
When contacting your authorized service dealer for
replacement parts, service or information you MUST have
these numbers.
Note:For the location of the engine identification numbers
refer to the the engine owner's manual or the menu option in
the digital display panel.
The Illustrated Parts Lists for this machine can be
downloaded fromferrismowers.com. Please provide model
and serial number when ordering replacement parts.
Operator Safety

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ferris IS600 Series and is the answer not in the manual?

Ferris IS600 Series Specifications

General IconGeneral
Cutting Width44, 52, or 61 inches
TransmissionHydro-Gear ZT-3100 Transaxles
Deck TypeFabricated
Engine TypeV-Twin
Cutting Height1.5 - 5 inches
Engine BrandKawasaki
Engine ManufacturerKawasaki
Deck Material10-gauge steel
Horsepower24 HP
Engine Power24 HP

Related product manuals