PC logo upload software
PC logo upload software
You can equip the A16 MK-II with your own logo that will be
displayed upon switching on and when activating the menu.
Additionally, you can enter a name with up to 16 characters
which will be transmitted to all PC programs for identifying
the A16 MK-II.
After starting the software A16logo.exe you have to establish
the MIDI connection at first. Select the interface and then click
connect.
Now you can select the desired A16 MK-II the logo shall be
applied to.
You can load a JPG, BMP or an image in another common
graphics format using the function file control. The image will
be scaled to the screen size of the A16 MK-II automatically
(220 x 176 pixel). You can additionally assign a name to the
A16 MK-II.
The function send will store the image, together with the name
of the A16 MK-II, permanently in the device.
It may happen that the image doesn't fit into the
memory of the A16 MK-II due to the image size. In
such a case change the image in a way that it features
many single-coloured regions, as the compression
rate is higher then.
15
To Next Page
Loading...
