A32 inputs and outputs
25
A32 inputs and outputs – USB and MIDI
USB
The USB port can be used to remote control the A32. When connecting
to the PC, the A32 will appear as a USB-MIDI device.
Also, USB will be used to flash new firmware to the A32. Please visit
our website to check for a new firmware version.
MIDI
It’s also possible to use the MIDI input and MIDI output ports for
remote control.
An advantage of the MIDI connection is the galvanic isolation, because
the MIDI input has an opto coupler. Also, it’s easy to daisy chain
multiple A32 using MIDI to remote control more than one unit at the
same time.
Another feature is that MIDI data from the MIDI port can be
embedded into the MADI stream and vice versa. Use the MIDI screen
to configure the routing of the MIDI data.
To Next Page
Loading...
