Remote Software
26
Remote Software
Please note: The remote software is not available at the time of
printing this manual. Please visit our website for more information.
The A32 can be controlled from a computer via this software. To do so,
select one option to connect the PC with the A32:
USB Interface
Connect the A32 using a USB cable with your PC. A USB-MIDI driver will
be installed automatically, then the connection will be established.
MIDI Interface
Use a MIDI Interface to connect the A32 with your PC.
MADI Interface (MIDI over MADI)
You can also use the MADI connection to transfer MIDI. In this case,
MIDI will be embedded in the MADI data stream. To use this feature,
you need to have a MADI card which is capable of embedding MIDI
data. Please check the documentation of your MADI card to find out if
it supports this feature or contact the card manufacturer.
After starting the program, first select the input and output MIDI port
of the A32 and press connect. All scanned A32’s will then be shown in a
list.
Now simply select an A32 to work with and you’re ready to remote
control it.
Please visit our website to download the software and for more
information: www.ferrofish.com
To Next Page
Loading...
