technical specifications
27
technical specifications
MADI I/O: optical + coaxial interface
64 channels @32kHz, 44.1kHz, 48kHz
32 channels @64kHz, 88.2kHz, 96kHz
32 channels @128kHz, 176.4kHz, 192kHz*
* both interfaces work independent to achieve full 32+32 channels
MIDI over MADI implemented
latency: 3 samples
automatic switching between optical <-> coax MADI when signal lost
ADAT I/O: 4+4 x optical interfaces
32 channels @32kHz, 44.1kHz, 48kHz
16 channels @64kHz, 88.2kHz, 96kHz
n/a @128kHz, 176.4kHz, 192kHz
latency: 3 samples
S/PDIF: ADAT 4 I/O can be reconfigured as S/PDIF
input has sample rate converter included (performance of SRC: -128dB)
output follows A32 sample frequency
Wordclock: BNC: 1 x input, 1 x output
75 Ohm Termination switchable for input
MIDI I/O: two DIN5 jacks, for remote
conversion MIDI <-> MIDI over MADI possible
A/D Converter: 4 x CS5368 (Cirrus Logic)
4 x DSub25 / Tascam
analog switches: +20dBu, +13dBu, +4dBu
digital gain: +20dBu...-8dBu, 1dB steps
latency: @48kHz: 12/fs, 0.25ms, @96kHz: 9/fs, 0.09ms,
@192kHz: 5/fs, 0.03ms
OpAmps: RC4580 + OPA1664
level indicator: TFT screen, 28 levels
D/A Converter: 4 x CS4365 (Cirrus Logic)
4 x DSub25 / Tascam
analog switches: +20dBu, +13dBu, +4dBu
digital gain: +20dBu...-8dBu, 1dB steps
latency: @48kHz: 7.8/fs, 0.16ms, @96kHz: 5.4/fs, 0.06ms,
@192kHz: 6.6/fs, 0.03ms
OpAmps: RC4580 + OPA1664
level indicator: TFT screen, 28 levels
USB: USB 2.0 (remote, update)
To Next Page
Loading...
