Introduction
HE series is a high-efficiency heat generator for hot water production
running on electric power and regulated by an advanced temperature
setting system.
Thanks to the integrated POLY insulating technology,the product is
equipped with extra thick insulating layer which can effective prevent
the heat loss from the out shell and save the energy.
The heater has a good safety system by using anti over-heating prot-
ection,anti over pressure protection and automatic cutting off accord-
ing to desired temperature.
The user only has to set the temperature desired.The temperature
setting system will provide optimum operation through the time.
Independent pressure releasing outlet,special for installing safety
valve.When the pressure of water heater is higher than the rated
pressure of inner tank,the safety valve will automatically release
pressure for assuring safety.
Independent sewage outlet,convenient for cleaning inner tank ass-
ure timely remove deposit from inner tank,it can also be used for
storing water if there isn't water supply,(particularly suitable for
places with poor water quality and water shortage).
1
The product is made from product line that is fully computer con-
trolled: the special deigned silicon powder is well coated on the
inner tank surface by electrostatic technology. Process of cooking
at 850℃ finally makes the inner tank perfectly protected against
shock and corrosion.
The extra big magnesium anode also provides a long product life.
General view and main component
Drawing 1
2
Out shell
Hot water outlet
ON/OFF indicator
Handle
Switch
1.
2.
3.
4.
11.
Cold water inlet
Temperature setting knob
Feet
Pressure release outlet
Sewage outlet
Heating elements
Insulating layer
1.
2.
3.
Magnesian
Inner tank
4.Magnesian
5.
Thermometer
Power cable
12.
6.
7.
8.
5.
9.
10.
1
2
3
4
5
1
2
3
4
5
9
10
11
12
8
10
11
12
8
To Next Page
Loading...
Need help?
General
