Need help?Do you have a question about the Ferroli MODENA 32 C HE and is the answer not in the manual?
Manufacturer's declaration of compliance with EU directives for the appliance.
Overview of the MODENA C HE boiler and its features.
Detailed explanation of the boiler's control panel and its buttons.
Procedure for switching the boiler on and off, including main power isolation.
Steps for boiler ignition and air purge sequence, and turning off.
How to adjust heating and hot water temperatures, and room temperature settings.
Setting up the Outside Temperature Compensation (OTC) curve and offset.
General guidelines and British Standards for boiler installation.
Requirements for the boiler's installation location, including ventilation and clearances.
Instructions for connecting the heating and hot water plumbing systems.
Details on the installation and use of isolation valves and make-up water provisions.
Guidelines for water treatment, connecting to the gas system.
Instructions for safe electrical connections and accessing terminal blocks.
Requirements for the flue system, including types, installation, and safety.
Examples and specifications for coaxial and twin pipe flue connections.
Minimum dimensions for fume exhaust terminal positions based on location.
How to connect the condensate drain system, including filling the trap.
Detailed guidance on routing and preventing freezing of the condensate drain pipe.
Procedure for converting the unit for different gas types and adjusting parameters.
Checks required before and during boiler start-up after installation or maintenance.
Detailed steps for commissioning the boiler, including test mode and gas pressure checks.
Checks and procedures for routine annual servicing and maintenance.
Instructions for accessing the boiler casing and performing combustion checks.
Adjusting the throttle and offset settings on the gas valve for optimal combustion.
A guide to diagnosing and resolving common boiler faults using error codes.
Diagrams showing the boiler's physical dimensions and connection points.
Illustrated view identifying the main internal components of the boiler.
Diagram illustrating the internal water flow path within the boiler.
A comprehensive table of technical data, performance, and specifications for the boiler models.
Pressure loss and pump performance diagrams for system design.
Electrical wiring diagram showing connections for various components and controls.
A checklist for competent persons to ensure compliance and demonstrate correct installation.
Form for recording annual boiler service details to maintain warranty.
To Next Page
General