To Next PageTo Next Page
Need help?Do you have a question about the Ferroli DOMIproject F 32 and is the answer not in the manual?
General| Category | Boiler |
|---|---|
| Type | Combi |
| Mounting | Wall-mounted |
| Heat output | 32 kW |
| Fuel | Natural Gas / LPG |
| Nominal output | 32 kW |
| Weight | 32 kg |
| Max working pressure | 3 bar |
| Ignition | Electronic |
| Heat exchanger material | Copper |
| NOx emissions | Class 5 |
| Electrical protection rating | IPX4D |
Details the DOMIproject F 24 - F 32 as a high-efficiency heat generator for heating and domestic hot water production.
Describes the boiler's control panel, including adjustment knobs and operational procedures like ignition and shutdown.
Guidance on adjusting system water pressure to the correct level, typically 1.0 bar when cold.
Emphasizes that installation must be performed by qualified personnel according to regulations and manual instructions.
Details the necessary plumbing connections for the boiler, including safety valve discharge and system pipes.
Details access to the terminal block and important safety warnings for room thermostat connection.
Procedures for adjusting the boiler, including gas conversion and setting the correct gas type.
Instructions on how to activate and deactivate the TEST mode for boiler diagnostics and power checks.
Instructions for adjusting the ignition power level for the boiler, using the TEST mode.
