RIMINI DP
A73021552 55
EN
EVANESCENT Function
Manual mode
TFT-LCD Screen
Infrared receiver for
Remote control
(OPTIONAL)
Temperature, day, hour and
parameters selection
Keyboard lock
Edit day, time and program
Selection of operating
mode
Standby key: switches the
radiator between Standby
and operational
Exit Open Window mode
Confirm day, time, program
and parameters
Copy the program
5. OPERATION
5.1. Control panel
The control panel is composed of a large TFT-LCD screen with white backlight and black
images for ease of legibility, and seven touch keys as outlined below:
5.2. Turning the radiator on and off
To turn on the radiator, it has to be plugged into the power supply (230 V ~ 50 Hz) through its
plug; the standby icon or the current operating mode will appear on the display. It is turned off
through its plug.
If the radiator is in standby mode, to set it to operational, touch and hold the Standby key;
a double beep will sound once the heater is operational. The screen lights up quickly, changing
from the standby screen to the previous operation mode.
From operational, to set it to Standby, touch and hold the Standby key; a
long beep will sound, appearing the standby icon on the screen (the light
fades after 1.5 seconds). When the heater is in standby mode, if you
touch any key the standby screen will appear for 10 seconds. From
Standby, the radiator can be locked (see section 5.9 of this manual).
In case of any power failure or disconnection the radiator will always remember the previous
mode of operation, the temperature, and the state (Standby / operational and locked / un-
locked). If it is the first time that it is plugged in or has been disconnected for more than 4
days, it will be necessary to edit the day and time according to point 5.5 of this manual. If the
disconnection has been for less than 4 days, the time and day of the week are saved.
Daily and weekly programs are never lost even when disconnected from power for long
periods.
To Next Page
Loading...
Need help?
General
